submitted by sidhujag to ethereum [link] [comments]
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.
SolutionsSyscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
Syscoin + Matic IntegrationMatic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.
Proving Performance & Cost SavingsOur POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.
Cost SavingsTotal cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.
Tools, Infrastructure & Documentation
Syscoin BridgeMainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
APITools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.
DocumentationSyscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence
Trade-offThe Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.
CostEthereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.
Z-DAGZero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).
APISyscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.
DocumentationZ-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana
Trade-offZ-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.
Syscoin SpecsSyscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
WalletsWeb3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
ExplorersMainnet: https://sys1.bcfn.ca (Blockbook)
Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!
submitted by SwipeWallet to Swipe_io [link] [comments]
London, United Kingdom — Swipe is proud to announce that it has launched its test network for Swipe Network Staking and will launch a Decentralized Finance Lending/Earn application on Binance Smart Chain. Swipe, which was recently acquired by Binance, has garnered enormous growth over the past month in all avenues of its business and plans to launch a new product, feature, event, listing, or partnership every week until the end of the year.
Swipe NetworkThe Swipe Network (swipe.org) is the payment protocol that enables real-time crypto-to-fiat conversions for all of Swipe’s products and services (Wallet, Card, & Issuing). With the launch of the Swipe Network testnet, users can use the Swipe Faucet to grab testnet-SXP to use on the decentralized finance application.
Users will be able to bond SXP to the Swipe Network smart contract as collateral to ensure the guarantee of conversions for these exchanges. Since Swipe facilitates real-time conversions on-demand, there is a reserve system in place to lock SXP and guarantee that the merchant and payment networks receive the exact fiat amount that it processes. Most of these processes occur off-chain and are guaranteed by Swipe at the moment, but now can be bonded by the community and on-chain.
Users will receive 12% APY on their staked SXP within the Swipe Network. Swipe plans to enable staked SXP to earn the processing fees it charges in the future as well on top of the collateral rewards from staking. The main network for swipe.org will be launched in two weeks. Users can access the testnet from: https://testnet.swipe.org with a public faucet being released in the next few days. To promote the usage of Swipe Network, Swipe will be partnering with exchanges that will offer staking and enhanced initial rewards and will be announced soon.
Swipe Finance (SwipeFi) & SGV — Lending/Earning DeFi App built on Binance Smart Chain controlled by the community by the Swipe Governance Token (SGV) and Liquidity Mining.Swipe is proud to announce its plans to launch a DeFi App on Binance Chain called SwipeFi which will enable Binance Chain tokens to be used to earn interest on their supply of collateral to the protocol and borrow against their collateral directly on the Binance blockchain. Swipe has been working with the core developers of Binance Smart Chain through the acquisition and partnerships between Swipe and Binance, to launch SwipeFi.
Users have witnessed historical highs in transaction fees, gas costs, and delays using the Ethereum blockchain for Decentralized Finance (DeFi). Bringing a complete lending/earn protocol using the battle-tested open-source protocols, such as Compound, to Binance chain gives users an immense value proposition.
Bitcoin, Ethereum, and other assets are already wrapped and issued on Binance Chain and are verifiable on their native blockchains for cross-compatibility, which will give exposure to use these assets for supplying and borrowing from SwipeFi. There are stablecoins such as BUSD, TUSD, and others that are also guaranteed on their native chains, which are wrapped and issued on Binance Chain already. Therefore, the base layer of the collateral needed to start a project of this magnitude already exists. Binance.com offers simple on and off-ramps for converting the Binance chain version to the native version (example: BTCB to BTC and vice versa) as well as SwipeFi plans to open up decentralized bridges for this wrapping.
Transactions on Binance Chain are considered one block finality, take less than ~5 seconds to complete, and cost a fraction of the price that it would cost on Ethereum. This will make DeFi transactions seamless and efficient.
SwipeFi will initially support BTC, BNB, ETH, BUSD, TUSD, and SXP to supply or borrow. The protocol will be governed by a new Binance Chain BEP2 token: Swipe Governance Token (SGV). SGV will be used on the protocol to vote on proposals and governance decisions while earned through liquidity mining so that the supplier and borrowers of the protocol can be incentivized to participate in governance as well. There will be a total supply of 10,000,000 SGV ever in existence.
On August 17, 2020, at 00:00 UTC, there will be a snapshot of SXP balances. There will be a distribution of 1 SGV per 100 SXP.
This will give an initial supply of approximately 2,999,700 SGV with the remaining SGV to be mined via Liquidity Mining by supplying and borrowing on the protocol over a 5 year period.
There will be no SGV sold or allocated to the team aside from what they already hold in SXP. This will enable users to mine over 70% of the total SGV supply over a five year period. Swipe will release the SwipeFi white paper and governance details by August 10, 2020, with plans to launch a testnet in September.
Stay up-to-date with all the latest news from Swipe
Telegram: https://t.me/SwipeWallet & https://t.me/Swipe
Author: Gamals Ahmed, CoinEx Business Ambassadorsubmitted by CoinEx_Institution to kybernetwork [link] [comments]
ABSTRACTIn this research report, we present a study on Kyber Network. Kyber Network is a decentralized, on-chain liquidity protocol designed to make trading tokens simple, efficient, robust and secure.
Kyber design allows any party to contribute to an aggregated pool of liquidity within each blockchain while providing a single endpoint for takers to execute trades using the best rates available. We envision a connected liquidity network that facilitates seamless, decentralized cross-chain token swaps across Kyber based networks on different chains.
Kyber is a fully on-chain liquidity protocol that enables decentralized exchange of cryptocurrencies in any application. Liquidity providers (Reserves) are integrated into one single endpoint for takers and users. When a user requests a trade, the protocol will scan the entire network to find the reserve with the best price and take liquidity from that particular reserve.
1.INTRODUCTIONDeFi applications all need access to good liquidity sources, which is a critical component to provide good services. Currently, decentralized liquidity is comprised of various sources including DEXes (Uniswap, OasisDEX, Bancor), decentralized funds and other financial apps. The more scattered the sources, the harder it becomes for anyone to either find the best rate for their trade or to even find enough liquidity for their need.
Kyber is a blockchain-based liquidity protocol that aggregates liquidity from a wide range of reserves, powering instant and secure token exchange in any decentralized application.
The protocol allows for a wide range of implementation possibilities for liquidity providers, allowing a wide range of entities to contribute liquidity, including end users, decentralized exchanges and other decentralized protocols. On the taker side, end users, cryptocurrency wallets, and smart contracts are able to perform instant and trustless token trades at the best rates available amongst the sources.
The Kyber Network is project based on the Ethereum protocol that seeks to completely decentralize the exchange of crypto currencies and make exchange trustless by keeping everything on the blockchain.
Through the Kyber Network, users should be able to instantly convert or exchange any crypto currency.
1.1 OVERVIEW ABOUT KYBER NETWORK PROTOCOLThe Kyber Network is a decentralized way to exchange ETH and different ERC20 tokens instantly — no waiting and no registration needed.
Using this protocol, developers can build innovative payment flows and applications, including instant token swap services, ERC20 payments, and financial DApps — helping to build a world where any token is usable anywhere.
Kyber’s fully on-chain design allows for full transparency and verifiability in the matching engine, as well as seamless composability with DApps, not all of which are possible with off-chain or hybrid approaches. The integration of a large variety of liquidity providers also makes Kyber uniquely capable of supporting sophisticated schemes and catering to the needs of DeFi DApps and financial institutions. Hence, many developers leverage Kyber’s liquidity pool to build innovative financial applications, and not surprisingly, Kyber is the most used DeFi protocol in the world.
The Kyber Network is quite an established project that is trying to change the way we think of decentralised crypto currency exchange.
The Kyber Network has seen very rapid development. After being announced in May 2017 the testnet for the Kyber Network went live in August 2017. An ICO followed in September 2017, with the company raising 200,000 ETH valued at $60 million in just one day.
The live main net was released in February 2018 to whitelisted participants, and on March 19, 2018, the Kyber Network opened the main net as a public beta. Since then the network has seen increasing growth, with network volumes growing more than 500% in the first half of 2019.
Although there was a modest decrease in August 2019 that can be attributed to the price of ETH dropping by 50%, impacting the overall total volumes being traded and processed globally.
They are developing a decentralised exchange protocol that will allow developers to build payment flows and financial apps. This is indeed quite a competitive market as a number of other such protocols have been launched.
In Brief - Kyber Network is a tool that allows anyone to swap tokens instantly without having to use exchanges. - It allows vendors to accept different types of cryptocurrency while still being paid in their preferred crypto of choice. - It’s built primarily for Ethereum, but any smart-contract based blockchain can incorporate it.
At its core, Kyber is a decentralized way to exchange ETH and different ERC20 tokens instantly–no waiting and no registration needed. To do this Kyber uses a diverse set of liquidity pools, or pools of different crypto assets called “reserves” that any project can tap into or integrate with.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
All this swapping happens directly on the Ethereum blockchain, meaning every transaction is completely transparent.
1.1.1 WHY BUILD THE KYBER NETWORK?While crypto currencies were built to be decentralized, many of the exchanges for trading crypto currencies have become centralized affairs. This has led to security vulnerabilities, with many exchanges becoming the victims of hacking and theft.
It has also led to increased fees and costs, and the centralized exchanges often come with slow transfer times as well. In some cases, wallets have been locked and users are unable to withdraw their coins.
Decentralized exchanges have popped up recently to address the flaws in the centralized exchanges, but they have their own flaws, most notably a lack of liquidity, and often times high costs to modify trades in their on-chain order books.
Some of the Integrations with Kyber Protocol
The Kyber Network was formed to provide users with a decentralized exchange that keeps everything right on the blockchain, and uses a reserve system rather than an order book to provide high liquidity at all times. This will allow for the exchange and transfer of any cryptocurrency, even cross exchanges, and costs will be kept at a minimum as well.
The Kyber Network has three guiding design philosophies since the start:
1.1.2 WHO INVENTED KYBER?Kyber’s founders are Loi Luu, Victor Tran, Yaron Velner — CEO, CTO, and advisor to the Kyber Network.
1.1.3 WHAT DISTINGUISHES KYBER?Kyber’s mission has always been to integrate with other protocols so they’ve focused on being developer-friendly by providing architecture to allow anyone to incorporate the technology onto any smart-contract powered blockchain. As a result, a variety of different dapps, vendors, and wallets use Kyber’s infrastructure including Set Protocol, bZx, InstaDApp, and Coinbase wallet.
Besides, dapps, vendors, and wallets, Kyber also integrates with other exchanges such as Uniswap — sharing liquidity pools between the two protocols.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
Limit orders on Kyber allow users to set a specific price in which they would like to exchange a token instead of accepting whatever price currently exists at the time of trading. However, unlike with other exchanges, users never lose custody of their crypto assets during limit orders on Kyber.
The Kyber protocol works by using pools of crypto funds called “reserves”, which currently support over 70 different ERC20 tokens. Reserves are essentially smart contracts with a pool of funds. Different parties with different prices and levels of funding control all reserves. Instead of using order books to match buyers and sellers to return the best price, the Kyber protocol looks at all the reserves and returns the best price among the different reserves. Reserves make money on the “spread” or differences between the buying and selling prices. The Kyber wants any token holder to easily convert one token to another with a minimum of fuss.
1.2 KYBER PROTOCOLThe protocol smart contracts offer a single interface for the best available token exchange rates to be taken from an aggregated liquidity pool across diverse sources. ● Aggregated liquidity pool. The protocol aggregates various liquidity sources into one liquidity pool, making it easy for takers to find the best rates offered with one function call. ● Diverse sources of liquidity. The protocol allows different types of liquidity sources to be plugged into. Liquidity providers may employ different strategies and different implementations to contribute liquidity to the protocol. ● Permissionless. The protocol is designed to be permissionless where any developer can set up various types of reserves, and any end user can contribute liquidity. Implementations need to take into consideration various security vectors, such as reserve spamming, but can be mitigated through a staking mechanism. We can expect implementations to be permissioned initially until the maintainers are confident about these considerations.
The core feature that the Kyber protocol facilitates is the token swap between taker and liquidity sources. The protocol aims to provide the following properties for token trades: ● Instant Settlement. Takers do not have to wait for their orders to be fulfilled, since trade matching and settlement occurs in a single blockchain transaction. This enables trades to be part of a series of actions happening in a single smart contract function. ● Atomicity. When takers make a trade request, their trade either gets fully executed, or is reverted. This “all or nothing” aspect means that takers are not exposed to the risk of partial trade execution. ● Public rate verification. Anyone can verify the rates that are being offered by reserves and have their trades instantly settled just by querying from the smart contracts. ● Ease of integration. Trustless and atomic token trades can be directly and easily integrated into other smart contracts, thereby enabling multiple trades to be performed in a smart contract function.
How each actor works is specified in Section Network Actors. 1. Takers refer to anyone who can directly call the smart contract functions to trade tokens, such as end-users, DApps, and wallets. 2. Reserves refer to anyone who wishes to provide liquidity. They have to implement the smart contract functions defined in the reserve interface in order to be registered and have their token pairs listed. 3. Registered reserves refer to those that will be cycled through for matching taker requests. 4. Maintainers refer to anyone who has permission to access the functions for the adding/removing of reserves and token pairs, such as a DAO or the team behind the protocol implementation. 5. In all, they comprise of the network, which refers to all the actors involved in any given implementation of the protocol.
The protocol implementation needs to have the following: 1. Functions for takers to check rates and execute the trades 2. Functions for the maintainers to registeremove reserves and token pairs 3. Reserve interface that defines the functions reserves needs to implement
1.3 KYBER CORE SMART CONTRACTSKyber Core smart contracts is an implementation of the protocol that has major protocol functions to allow actors to join and interact with the network. For example, the Kyber Core smart contracts provide functions for the listing and delisting of reserves and trading pairs by having clear interfaces for the reserves to comply to be able to register to the network and adding support for new trading pairs. In addition, the Kyber Core smart contracts also provide a function for takers to query the best rate among all the registered reserves, and perform the trades with the corresponding rate and reserve. A trading pair consists of a quote token and any other token that the reserve wishes to support. The quote token is the token that is either traded from or to for all trades. For example, the Ethereum implementation of the Kyber protocol uses Ether as the quote token.
In order to search for the best rate, all reserves supporting the requested token pair will be iterated through. Hence, the Kyber Core smart contracts need to have this search algorithm implemented.
The key functions implemented in the Kyber Core Smart Contracts are listed in Figure 2 below. We will visit and explain the implementation details and security considerations of each function in the Specification Section.
1.4 HOW KYBER’S ON-CHAIN PROTOCOL WORKS?Kyber is the liquidity infrastructure for decentralized finance. Kyber aggregates liquidity from diverse sources into a pool, which provides the best rates for takers such as DApps, Wallets, DEXs, and End users.
1.4.1 PROVIDING LIQUIDITY AS A RESERVEAnyone can operate a Kyber Reserve to market make for profit and make their tokens available for DApps in the ecosystem. Through an open reserve architecture, individuals, token teams and professional market makers can contribute token assets to Kyber’s liquidity pool and earn from the spread in every trade. These tokens become available at the best rates across DApps that tap into the network, making them instantly more liquid and useful.
MAIN RESERVE TYPES Kyber currently has over 45 reserves in its network providing liquidity. There are 3 main types of reserves that allow different liquidity contribution options to suit the unique needs of different providers. 1. Automated Price Reserves (APR) — Allows token teams and users with large token holdings to have an automated yet customized pricing system with low maintenance costs. Synthetix and Melon are examples of teams that run APRs. 2. Fed Price Reserves (FPR) — Operated by professional market makers that require custom and advanced pricing strategies tailored to their specific needs. Kyber alongside reserves such as OneBit, runs FPRs. 3. Bridge Reserves (BR) — These are specialized reserves meant to bring liquidity from other on-chain liquidity providers like Uniswap, Oasis, DutchX, and Bancor into the network.
1.5 KYBER NETWORK ROLESThere Kyber Network functions through coordination between several different roles and functions as explained below: - Users — This entity uses the Kyber Network to send and receive tokens. A user can be an individual, a merchant, and even a smart contract account. - Reserve Entities — This role is used to add liquidity to the platform through the dynamic reserve pool. Some reserve entities are internal to the Kyber Network, but others may be registered third parties. Reserve entities may be public if the public contributes to the reserves they hold, otherwise they are considered private. By allowing third parties as reserve entities the network adds diversity, which prevents monopolization and keeps exchange rates competitive. Allowing third party reserve entities also allows for the listing of less popular coins with lower volumes. - Reserve Contributors — Where reserve entities are classified as public, the reserve contributor is the entity providing reserve funds. Their incentive for doing so is a profit share from the reserve. - The Reserve Manager — Maintains the reserve, calculates exchange rates and enters them into the network. The reserve manager profits from exchange spreads set by them on their reserves. They can also benefit from increasing volume by accessing the entire Kyber Network. - The Kyber Network Operator — Currently the Kyber Network team is filling the role of the network operator, which has a function to adds/remove Reserve Entities as well as controlling the listing of tokens. Eventually, this role will revert to a proper decentralized governance.
1.6 BASIC TOKEN TRADEA basic token trade is one that has the quote token as either the source or destination token of the trade request. The execution flow of a basic token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for ETH as an example. The trade happens in a single blockchain transaction. 1. Taker sends 1 ETH to the protocol contract, and would like to receive BAT in return. 2. Protocol contract queries the first reserve for its ETH to BAT exchange rate. 3. Reserve 1 offers an exchange rate of 1 ETH for 800 BAT. 4. Protocol contract queries the second reserve for its ETH to BAT exchange rate. 5. Reserve 2 offers an exchange rate of 1 ETH for 820 BAT. 6. This process goes on for the other reserves. After the iteration, reserve 2 is discovered to have offered the best ETH to BAT exchange rate. 7. Protocol contract sends 1 ETH to reserve 2. 8. The reserve sends 820 BAT to the taker.
1.7 TOKEN-TO-TOKEN TRADEA token-to-token trade is one where the quote token is neither the source nor the destination token of the trade request. The exchange flow of a token to token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for DAI as an example. The trade happens in a single blockchain transaction. 1. Taker sends 50 BAT to the protocol contract, and would like to receive DAI in return. 2. Protocol contract sends 50 BAT to the reserve offering the best BAT to ETH rate. 3. Protocol contract receives 1 ETH in return. 4. Protocol contract sends 1 ETH to the reserve offering the best ETH to DAI rate. 5. Protocol contract receives 30 DAI in return. 6. Protocol contract sends 30 DAI to the user.
2.KYBER NETWORK CRYSTAL (KNC) TOKENKyber Network Crystal (KNC) is an ERC-20 utility token and an integral part of Kyber Network.
KNC is the first deflationary staking token where staking rewards and token burns are generated from actual network usage and growth in DeFi.
The Kyber Network Crystal (KNC) is the backbone of the Kyber Network. It works to connect liquidity providers and those who need liquidity and serves three distinct purposes. The first of these is to collect transaction fees, and a portion of every fee collected is burned, which keeps KNC deflationary. Kyber Network Crystals (KNC), are named after the crystals in Star Wars used to power light sabers.
The KNC also ensures the smooth operation of the reserve system in the Kyber liquidity since entities must use third-party tokens to buy the KNC that pays for their operations in the network.
KNC allows token holders to play a critical role in determining the incentive system, building a wide base of stakeholders, and facilitating economic flow in the network. A small fee is charged each time a token exchange happens on the network, and KNC holders get to vote on this fee model and distribution, as well as other important decisions. Over time, as more trades are executed, additional fees will be generated for staking rewards and reserve rebates, while more KNC will be burned. - Participation rewards — KNC holders can stake KNC in the KyberDAO and vote on key parameters. Voters will earn staking rewards (in ETH) - Burning — Some of the network fees will be burned to reduce KNC supply permanently, providing long-term value accrual from decreasing supply. - Reserve incentives — KNC holders determine the portion of network fees that are used as rebates for selected liquidity providers (reserves) based on their volume performance.
Finally, the KNC token is the connection between the Kyber Network and the exchanges, wallets, and dApps that leverage the liquidity network. This is a virtuous system since entities are rewarded with referral fees for directing more users to the Kyber Network, which helps increase adoption for Kyber and for the entities using the Network.
And of course there will soon be a fourth and fifth uses for the KNC, which will be as a staking token used to generate passive income, as well as a governance token used to vote on key parameters of the network.
The Kyber Network Crystal (KNC) was released in a September 2017 ICO at a price around $1. There were 226,000,000 KNC minted for the ICO, with 61% sold to the public. The remaining 39% are controlled 50/50 by the company and the founders/advisors, with a 1 year lockup period and 2 year vesting period.
Currently, just over 180 million coins are in circulation, and the total supply has been reduced to 210.94 million after the company burned 1 millionth KNC token in May 2019 and then its second millionth KNC token just three months later.
That means that while it took 15 months to burn the first million KNC, it took just 10 weeks to burn the second million KNC. That shows how rapidly adoption has been growing recently for Kyber, with July 2019 USD trading volumes on the Kyber Network nearly reaching $60 million. This volume has continued growing, and on march 13, 2020 the network experienced its highest daily trading activity of $33.7 million in a 24-hour period.
Currently KNC is required by Reserve Managers to operate on the network, which ensures a minimum amount of demand for the token. Combined with future plans for burning coins, price is expected to maintain an upward bias, although it has suffered along with the broader market in 2018 and more recently during the summer of 2019.
It was unfortunate in 2020 that a beginning rally was cut short by the coronavirus pandemic, although the token has stabilized as of April 2020, and there are hopes the rally could resume in the summer of 2020.
2.1 HOW ARE KNC TOKENS PRODUCED?The native token of Kyber is called Kyber Network Crystals (KNC). All reserves are required to pay fees in KNC for the right to manage reserves. The KNC collected as fees are either burned and taken out of the total supply or awarded to integrated dapps as an incentive to help them grow.
2.2 HOW DO YOU GET HOLD OF KNC TOKENS?Kyber Swap can be used to buy ETH directly using a credit card, which can then be used to swap for KNC. Besides Kyber itself, exchanges such as Binance, Huobi, and OKex trade KNC.
2.3 WHAT CAN YOU DO WITH KYBER?The most direct and basic function of Kyber is for instantly swapping tokens without registering an account, which anyone can do using an Etheruem wallet such as MetaMask. Users can also create their own reserves and contribute funds to a reserve, but that process is still fairly technical one–something Kyber is working on making easier for users in the future.
2.4 THE GOAL OF KYBER THE FUTUREThe goal of Kyber in the coming years is to solidify its position as a one-stop solution for powering liquidity and token swapping on Ethereum. Kyber plans on a major protocol upgrade called Katalyst, which will create new incentives and growth opportunities for all stakeholders in their ecosystem, especially KNC holders. The upgrade will mean more use cases for KNC including to use KNC to vote on governance decisions through a decentralized organization (DAO) called the KyberDAO.
With our upcoming Katalyst protocol upgrade and new KNC model, Kyber will provide even more benefits for stakeholders. For instance, reserves will no longer need to hold a KNC balance for fees, removing a major friction point, and there will be rebates for top performing reserves. KNC holders can also stake their KNC to participate in governance and receive rewards.
2.5 BUYING & STORING KNCThose interested in buying KNC tokens can do so at a number of exchanges. Perhaps your best bet between the complete list is the likes of Coinbase Pro and Binance. The former is based in the USA whereas the latter is an offshore exchange.
The trading volume is well spread out at these exchanges, which means that the liquidity is not concentrated and dependent on any one exchange. You also have decent liquidity on each of the exchange books. For example, the Binance BTC / KNC books are wide and there is decent turnover. This means easier order execution.
KNC is an ERC20 token and can be stored in any wallet with ERC20 support, such as MyEtherWallet or MetaMask. One interesting alternative is the KyberSwap Android mobile app that was released in August 2019.
It allows for instant swapping of tokens and has support for over 70 different altcoins. It also allows users to set price alerts and limit orders and works as a full-featured Ethereum wallet.
2.6 KYBER KATALYST UPGRADEKyber has announced their intention to become the de facto liquidity layer for the Decentralized Finance space, aiming to have Kyber as the single on-chain endpoint used by the majority of liquidity providers and dApp developers. In order to achieve this goal the Kyber Network team is looking to create an open ecosystem that garners trust from the decentralized finance space. They believe this is the path that will lead the majority of projects, developers, and users to choose Kyber for liquidity needs. With that in mind they have recently announced the launch of a protocol upgrade to Kyber which is being called Katalyst.
The Katalyst upgrade will create a stronger ecosystem by creating strong alignments towards a common goal, while also strengthening the incentives for stakeholders to participate in the ecosystem.
The primary beneficiaries of the Katalyst upgrade will be the three major Kyber stakeholders: 1. Reserve managers who provide network liquidity; 2. dApps that connect takers to Kyber; 3. KNC holders.
These stakeholders can expect to see benefits as highlighted below: Reserve Managers will see two new benefits to providing liquidity for the network. The first of these benefits will be incentives for providing reserves. Once Katalyst is implemented part of the fees collected will go to the reserve managers as an incentive for providing liquidity.
This mechanism is similar to rebates in traditional finance, and is expected to drive the creation of additional reserves and market making, which in turn will lead to greater liquidity and platform reach.
Katalyst will also do away with the need for reserve managers to maintain a KNC balance for use as network fees. Instead fees will be automatically collected and used as incentives or burned as appropriate. This should remove a great deal of friction for reserves to connect with Kyber without affecting the competitive exchange rates that takers in the system enjoy. dApp Integrators will now be able to set their own spread, which will give them full control over their own business model. This means the current fee sharing program that shares 30% of the 0.25% fee with dApp developers will go away and developers will determine their own spread. It’s believed this will increase dApp development within Kyber as developers will now be in control of fees.
KNC Holders, often thought of as the core of the Kyber Network, will be able to take advantage of a new staking mechanism that will allow them to receive a portion of network fees by staking their KNC and participating in the KyberDAO.
2.7 COMING KYBERDAOWith the implementation of the Katalyst protocol the KNC holders will be put right at the heart of Kyber. Holders of KNC tokens will now have a critical role to play in determining the future economic flow of the network, including its incentive systems.
The primary way this will be achieved is through KyberDAO, a way in which on-chain and off-chain governance will align to streamline cooperation between the Kyber team, KNC holders, and market participants.
The Kyber Network team has identified 3 key areas of consideration for the KyberDAO: 1. Broad representation, transparent governance and network stability 2. Strong incentives for KNC holders to maintain their stake and be highly involved in governance 3. Maximizing participation with a wide range of options for voting delegation
Interaction between KNC Holders & Kyber
This means KNC holders have been empowered to determine the network fee and how to allocate the fees to ensure maximum network growth. KNC holders will now have three fee allocation options to vote on: - Voting Rewards: Immediate value creation. Holders who stake and participate in the KyberDAO get their share of the fees designated for rewards. - Burning: Long term value accrual. The decreasing supply of KNC will improve the token appreciation over time and benefit those who did not participate. - Reserve Incentives:Value creation via network growth. By rewarding Kyber reserve managers based on their performance, it helps to drive greater volume, value, and network fees.
2.8 TRANSPARENCY AND STABILITYThe design of the KyberDAO is meant to allow for the greatest network stability, as well as maximum transparency and the ability to quickly recover in emergency situations. Initally the Kyber team will remain as maintainers of the KyberDAO. The system is being developed to be as verifiable as possible, while still maintaining maximum transparency regarding the role of the maintainer in the DAO.
Part of this transparency means that all data and processes are stored on-chain if feasible. Voting regarding network fees and allocations will be done on-chain and will be immutable. In situations where on-chain storage or execution is not feasible there will be a set of off-chain governance processes developed to ensure all decisions are followed through on.
2.9 KNC STAKING AND DELEGATIONStaking will be a new addition and both staking and voting will be done in fixed periods of times called “epochs”. These epochs will be measured in Ethereum block times, and each KyberDAO epoch will last roughly 2 weeks.
This is a relatively rapid epoch and it is beneficial in that it gives more rapid DAO conclusion and decision-making, while also conferring faster reward distribution. On the downside it means there needs to be a new voting campaign every two weeks, which requires more frequent participation from KNC stakeholders, as well as more work from the Kyber team.
Delegation will be part of the protocol, allowing stakers to delegate their voting rights to third-party pools or other entities. The pools receiving the delegation rights will be free to determine their own fee structure and voting decisions. Because the pools will share in rewards, and because their voting decisions will be clearly visible on-chain, it is expected that they will continue to work to the benefit of the network.
3. TRADINGAfter the September 2017 ICO, KNC settled into a trading price that hovered around $1.00 (decreasing in BTC value) until December. The token has followed the trend of most other altcoins — rising in price through December and sharply declining toward the beginning of January 2018.
The KNC price fell throughout all of 2018 with one exception during April. From April 6th to April 28th, the price rose over 200 percent. This run-up coincided with a blog post outlining plans to bring Bitcoin to the Ethereum blockchain. Since then, however, the price has steadily fallen, currently resting on what looks like a $0.15 (~0.000045 BTC) floor.
With the number of partners using the Kyber Network, the price may rise as they begin to fully use the network. The development team has consistently hit the milestones they’ve set out to achieve, so make note of any release announcements on the horizon.
4. COMPETITIONThe 0x project is the biggest competitor to Kyber Network. Both teams are attempting to enter the decentralized exchange market. The primary difference between the two is that Kyber performs the entire exchange process on-chain while 0x keeps the order book and matching off-chain.
As a crypto swap exchange, the platform also competes with ShapeShift and Changelly.
5.KYBER MILESTONES• June 2020: Digifox, an all-in-one finance application by popular crypto trader and Youtuber Nicholas Merten a.k.a DataDash (340K subs), integrated Kyber to enable users to easily swap between cryptocurrencies without having to leave the application. • June 2020: Stake Capital partnered with Kyber to provide convenient KNC staking and delegation services, and also took a KNC position to participate in governance. • June 2020: Outlined the benefits of the Fed Price Reserve (FPR) for professional market makers and advanced developers. • May 2020: Kyber crossed US$1 Billion in total trading volume and 1 Million transactions, performed entirely on-chain on Ethereum. • May 2020: StakeWith.Us partnered Kyber Network as a KyberDAO Pool Master. • May 2020: 2Key, a popular blockchain referral solution using smart links, integrated Kyber’s on-chain liquidity protocol for seamless token swaps • May 2020: Blockchain game League of Kingdoms integrated Kyber to accept Token Payments for Land NFTs. • May 2020: Joined the Zcash Developer Alliance , an invite-only working group to advance Zcash development and interoperability. • May 2020: Joined the Chicago DeFi Alliance to help accelerate on-chain market making for professionals and developers. • March 2020: Set a new record of USD $33.7M in 24H fully on-chain trading volume, and $190M in 30 day on-chain trading volume. • March 2020: Integrated by Rarible, Bullionix, and Unstoppable Domains, with the KyberWidget deployed on IPFS, which allows anyone to swap tokens through Kyber without being blocked. • February 2020: Popular Ethereum blockchain game Axie Infinity integrated Kyber to accept ERC20 payments for NFT game items. • February 2020: Kyber’s protocol was integrated by Gelato Finance, Idle Finance, rTrees, Sablier, and 0x API for their liquidity needs. • January 2020: Kyber Network was found to be the most used protocol in the whole decentralized finance (DeFi) space in 2019, according to a DeFi research report by Binance. • December 2019: Switcheo integrated Kyber’s protocol for enhanced liquidity on their own DEX. • December 2019: DeFi Wallet Eidoo integrated Kyber for seamless in-wallet token swaps. • December 2019: Announced the development of the Katalyst Protocol Upgrade and new KNC token model. • July 2019: Developed the Waterloo Bridge , a Decentralized Practical Cross-chain Bridge between EOS and Ethereum, successfully demonstrating a token swap between Ethereum to EOS. • July 2019: Trust Wallet, the official Binance wallet, integrated Kyber as part of its decentralized token exchange service, allowing even more seamless in-wallet token swaps for thousands of users around the world. • May 2019: HTC, the large consumer electronics company with more than 20 years of innovation, integrated Kyber into its Zion Vault Wallet on EXODUS 1 , the first native web 3.0 blockchain phone, allowing users to easily swap between cryptocurrencies in a decentralized manner without leaving the wallet. • January 2019: Introduced the Automated Price Reserve (APR) , a capital efficient way for token teams and individuals to market make with low slippage. • January 2019: The popular Enjin Wallet, a default blockchain DApp on the Samsung S10 and S20 mobile phones, integrated Kyber to enable in-wallet token swaps. • October 2018: Kyber was a founding member of the WBTC (Wrapped Bitcoin) Initiative and DAO. • October 2018: Developed the KyberWidget for ERC20 token swaps on any website, with CoinGecko being the first major project to use it on their popular site.
Written by TokenInsightsubmitted by CoinExcom to btc [link] [comments]
Published by tokenin.cn
OutlookThe development of CoinEx Chain contributes to the future development of CoinEx’s centralized and decentralized exchanges; the concept of trichain operation simplifies the functions of each chain, improving their performance. At present, there are few exchanges working on the public chain, and no fierce competition has occurred.
ConclusionConsidering the status and development prospects of the project, TokenInsight gives CoinEx a rating of BB with a stable outlook.
1. Multidimensional evaluation
2. Project analysisCoinEx (CoinEx Technology Limited) was established in December 2017 and is headquartered in Hong Kong, China. It is a sub-brand of the ViaBTC mining pool. At present, CoinEx’s business scope includes CoinEx exchange, CoinEx public chain, and CoinEx decentralized exchange. The current development focus of the CoinEx platform are public chain and exchange. The main purpose of the public chain is to build a decentralized exchange (DEX) infrastructure and an ecosystem around DEX.
CoinEx business structure，Source: CoinEx; TokenInsight
2.1 Introduction“ CoinEx Chain uses the parallel operation of three chains which are DEX, Smart, and Privacy, as well as cross-chain technologies to create a rich decentralized exchange ecosystem and blockchain financial infrastructure.
The core of CoinEx’s early business was the exchange, consisted of two major categories which were spot and derivatives trading. Currently, there are 123 trading currencies online, covering 302 trading pairs. On June 28, 2019, CoinEx released the CoinEx Chain public chain white paper, aiming to build a decentralized trading system (CoinEx DEX) with community-based operations and transparent transaction rules, and providing user-controlled asset trading scenario by the highest technical standards in the industry; CoinEx Chain has become another development focus of CoinEx. CoinEx Token (CET), which was originally a native token of the CoinEx exchange, will also be developed mainly as a built-in token of the public chain.
CoinEx Chain is a public chain based on the Tendermint consensus protocol and Cosmos SDK, and it uses POS mechanism. CoinEx Chain plans to support 42 nodes when the project starts, and any entity in the ecosystem can participate in the validator’s campaign by staking CET. CoinEx Chain will use the new block reward and the transaction fee contained in the block as the reward for running the node.
CoinEx Chain has developed three public chains with different positioning and different functions in order to meet the needs of blockchain transactions for transaction performance, smart contracts, and privacy protection at the same time. They operate in parallel and collaborate with each other through cross-chain technology. At present, the block time of the public chain is between 2–3 seconds. According to the observation of TokenInsight, the block time is stable, but the number of transactions through the CoinEx public chain is still low at present, the number of transactions in 24 hours is about 30,000; The TPS on public chain disclosed by CoinEx can reach up to 1500 per second.
CoinEx Chain uses a trichain parallel model to build a more vibrant ecosystem around DEX. The three chains are DEX public chain, Smart public chain, and Privacy public chain, respectively responsible for decentralized transactions, smart contracts, and on-chain privacy protection.
CETs that need to participate in complex financial contracts can be transferred to the Smart public chain through the DEX public chain, then moved back to the DEX public chain after that. CET tokens that need to participate in token confusion can also be carried out through the privacy transaction of the Privacy public chain, and can eventually be returned to the DEX public chain. The three public chains are responsible for their respective duties, and they are interconnected through the cross-chain technology through the relay mechanism. In addition to ensuring their respective transaction processing speed and functional attributes, they can also jointly provide richer and safer functions, and synergistically constitute the CoinEx decentralized public chain ecosystem.
In addition, CoinEx Chain also supports any participant to issue new tokens on the chain and create new trading pairs for the issued tokens. CoinEx Chain guarantees the circulation of new tokens by establishing a trading pair between the new token and CET.
2.2 Component architecture“ Tendermint Core and Cosmos SDK have improved the performance and operation capability of the blockchain. The SDK packaging reduces the consideration of non-related logic, hence reducing the development complexity.
CoinEx Chain is based on Tendermint Core and Cosmos SDK, both of which have brought a big boost to the development of CoinEx public chain performance. Cosmos-SDK will implement the application logic of the blockchain. Together with the Tendermint consensus engine, it implements the three-layer architecture of the CoinEx public chain: the application layer, the consensus layer, and the network layer.
Tendermint is based on the state machine replication technology and is suitable for blockchain ledger storage. It is a list of transactions making consensus with Byzantine fault tolerance, the transactions are executed in the same order, and eventually the same state is obtained. Tendermint can be used to build various distributed applications.
Cosmos-SDK is a blockchain framework that supports the construction of multiple assets with a consensus mechanism of POS (Proof of Stake) or POA (Proof of Authority). The goal of the Cosmos SDK is to allow developers to easily build custom blockchains from 0, while enabling the interaction with other blockchains.
Cosmos-SDK is a blockchain framework that supports the construction of multiple assets with a consensus mechanism of POS (Proof of Stake) or POA (Proof of Authority). The goal of the Cosmos SDK is to allow developers to easily build custom blockchains from 0, while enabling the interaction with other blockchains. The blockchain development framework Cosmos SDK implements general functions such as account management, community governance, and staking in a modular form. Therefore, using the Cosmos SDK to build a public chain can simplify development procedures and facilitate operation. Tendermint is a fixed protocol in a partially synchronized environment, which can achieve throughput within a delay range of the network and each process itself. The CoinEx public chain is developed based on both, improving the performance and operability of the blockchain. The SDK packaging further reduces considerations of non-related logic and reduces the complexity of developers creating. The two components of Tendermint and Cosmos SDK are connected and interacted through the Application Blockchain Interface.
Cosmos SDK and Tendermint interworking structure，Source:CoinEx; TokenInsight
2.3 Project public chain planningThe development plan of the CoinEx public chain is to create a series of public chains with specific application directions, including:
2.4 Operation analysis“ The CoinEx platform publishes monthly ecosystem reports with high transparency; but the monthly reports are limited to contents about transactions and development, and lack progress in ecosystem and community construction, making them relatively simple.
2.4.1 Disclosure of ecosystem information
Operational risks have a direct impact on platform users. Whether platform operations are smooth and whether there is transparency are issues that platform users care about.
The CoinEx platform was established in 2017 and has around 3 years of development. It is also one of the platforms that has been developing for a long time in the exchange industry. It has obtained a digital currency trading license issued by the Estonian Financial Intelligence Unit (FIU), and the platform’s compliance is guaranteed to some degree.
The actual operation of the CoinEx platform will be displayed in the form of ecosystem monthly reports. The monthly report contains various types of content such as online currencies, new activities, plans for the next month, and ecosystem dynamics. It involves multiple business dimensions including the CoinEx exchange, CoinEx Public Chain, and CET token.
Snippet of a CoinEx ecosystem monthly report，Source: CoinEx; TokenInsight
CoinEx Chain released its development roadmap for the four quarters of 2020 in January 2020. The roadmap shows that CoinEx Chain will undergo major updates on smart contracts and DEX hard fork upgrades. The project roadmap is basically planned on a monthly basis, with a clear plan and a clear direction of development.
CoinEx Public Chain 2020 Development Roadmap，Source: CoinEx; TokenInsight
In addition to the development route planned in the roadmap, CoinEx public chain also discloses its goals for next month in its monthly ecological report. The project’s main net was launched online in November 2019. According to TokenInsight’s review of the development of CoinEx public chain from January to April and the disclosure of the project’s ecosystem monthly report, the project’s plan about development of the smart contract Demo in February failed to be completed as planned; the project completed launching of the new version of the blockchain browser and the Asian Atlantis upgrade; the smart contract virtual machine development was planned to be completed in April, but the progress related to supporting cross-chain agreements was not disclosed yet.
Overall, the project’s development route planning is clear, and the project’s development schedule is consistent with the plan, but there are still some discrepancies. Operation and development information is disclosed every month, and information transparency is high.
3. Industry & CompetitorsThe earliest origin of the exchange layout in the public chain field began in early 2018 when Binance released an announcement to start the development of the Binance Public Chain officially. In June of the same year, Huobi announced at its brand upgrade conference that it will combine the technical capabilities of the Huobi technical team and the community developers to develop the Huobi public chain called “Huobi Chain”. In December of the same year, OK Group announced the launch of its self-developed public chain OKchain, dedicating to provide underlying technical support and services for startups stationed in B-Labs.
The successful launch of the public chain brings huge strategic significance to the exchange, which can not only improve the performance of the existing business of the exchange but also achieve further expansion of its influence. As one of the most important blockchain infrastructures, the public chain can benefit the exchanges behind it.
As a platform for developing public chain technology exchanges, CoinEx’s main competitors in the field of public chain development include Binance, Huobi, and OKEx. Although they are all exchange platforms for deploying public chains, the above four are different in terms of specific functions, economic models, and critical points of the public chain.
3.1 Development progress comparisonIn 2019, Binance became the first exchange to launch a public chain among all digital asset exchanges, and its main product is Binance exchange (DEX). In April 2020, Binance announced the launch of a second smart contract chain, using Ethereum’s virtual machine, so that developers can build decentralized applications without affecting the performance and functionality of their original chain.
OKEx launched OKChain’s testnet in February 2020 and completed open source two months later. OKChain is designed as the basis of large-scale blockchain-driven business applications, with the characteristics of source code decentralization, point-to-point, irreversibility, and efficient autonomy.
Huobi released Huobi Chain for the first time in July 2019, the code is open source, and the testnet was released in February 2020. As a “regulator-friendly financial blockchain”, Huobi Chain focuses on providing compliance services for companies and financial institutions.
The CoinEx public chain officially completed the main online launch in November 2019 and completed the new block browser’s launch in March 2020. On April 3, 2020, CoinEx DEX uploaded the underlying code to Github to achieve open source. The CoinEx public chain is more inclined to build a full DEX ecosystem to achieve a one-stop solution for issuing, listing, storing, and trading. The long-term goal is to create a blockchain financial infrastructure.
3.2 Comparison of economic modelsAt present, the exchange is more inclined to use its existing platform currency as the native token of the public chain in the construction of public chain ecology. CoinEx’s CET, Binance’s BNB, and Huobi’s HT all fall into this category. OKEx is the only exchange that issues new tokens for its OKChain, which means OKT is the only ‘inflation token’ in the exchange’s public chain, while CET, HT, and BNB are all deflationary.
3.3 Decentralization of public chainThe initial number of CoinEx public chain verification nodes is 42, which is currently the most decentralized among all exchange public chains, and able to take both efficiency and decentralization into account; OKChain also currently has a relatively high degree of decentralization in the exchange public chain (21 verification nodes), its nodes have a high degree of autonomy; by contrast, Binance still firmly controls the operation of nodes and transactions; In terms of encourages cooperation between regulators and the private financial aspects, Huobi provides a lesser degree of decentralization. Huobi Chain uses a variant of the DPoS consensus algorithm to provide functions such as “supervision nodes”, allowing regulators to become validators.
Comparison of some dimensions of CoinEx, Huobi, Binance and OKEx public chain，Source: TokenInsight
4. Token EconomyCoinEx Token (CET) is a native token of the CoinEx ecosystem. It was issued in January 2018. Token holders can enjoy some user value-added services within the ecosystem. Currently, it is mainly used as a native token on the CoinEx Chain. As of 11 am on April 23, 2020, the current circulation of CET tokens in the market is 3,215,354,906.31, with a total of 5,842,177,609.53. CET tokens will not be further issued or inflated. Currently, daily repurchase and quarterly destruction are carried out. The repurchase destruction dynamics can now be tracked real-time on the CET repurchase system on the platform.
4.1 Token DistributionThe CET token used to be based on the ERC-20 token developed by Ethereum. Since the CoinEx Chain mainnet was launched in November 2019, some ERC-20 CET tokens have been mapped to the mainnet CET, and the rest of the CET will be mapped before November 10, 2020. CET holders need to deposit ERC-20 CET to the COinEX exchange, and the exchange will conduct the main network mapping.
At present, CET is mainly circulated in the form of mainnet tokens, and only a small portion of ERC-20 CET has not been mapped. The distribution of token holdings currently circulating on the mainnet can be seen in the figure below. At present, the number of tokens held by the top ten holders accounts for about 60.44% of all mainnet CET tokens.
Distribution of CET token holding addresses，Source: Etherscan; TokenInsight
The following figure shows the initial distribution of tokens after the mainnet mapping preset by CoinEx. From the initial distribution map of CET, it shows that, after mapping, a large portion of CET remains concentrated in the hands of the team (31%), and the actual number of CET circulating in the market only accounts for 49% of the total.
The initial distribution of CET token，Source: CoinEx; TokenInsight
After the main net mapping, the 31% of the total CET (1.8 billion) held by the team will be gradually unlocked in the five years from 2020 to 2024, and 360 million CET will be unlocked each year. By 2024, the CET held by the team will be completely unlocked. From the current CET dynamics, the CET share held by some teams has been used for destruction purposes to achieve the purpose of CET austerity. If the frozen 1.8 billion CET held by the team are used for similar purposes, the development of CET and its platform can benefit from it.
Team’s CET unlocking plan，Source: CoinEx; TokenInsight
4.2 Token economic model4.2.1 Deflation mechanism
Since the CET token went online in January 2018, CoinEx has increased the circulation of CET through airdrops, transaction fee refunds, operation promotion, and team unlocking. As one of the existing platform coins with long development time, the deflation mechanism of CET token has undergone a series of changes with the development of the industry. In 2018, when the concept of coin-based mining prevailed, CET used transaction mining, stake mining, and pending order mining, which were cancelled in October, December and, April respectively of the following year.
The repurchase and destruction model currently used by CET was updated by CoinEx on April 11, 2020. The original CET quarterly repurchase and destruction policy of the platform will be adjusted to daily repurchase and quarterly destruction. After the implementation of the daily repurchase policy, CoinEx will take out 50% of the daily fee income for CET repurchase in the secondary market and implement quarterly destruction until the total remaining circulation is 3 billion (currently about 5.8 billion).
At the same time that CoinEx updated the repurchase and destruction plan on April 11, the platform also launched a page dedicated to displaying CET repurchase information, so that users can clearly understand the progress of CET repurchase and destruction.
As of April 23, 2020, the platform has destroyed 4,157,822,390.46 CET tokens, accounting for 41.6% of the initial total issuance. At the end of January 2019, it had destroyed 4 billion CETs (single destruction volume peak) at the end of this quarter. The number of CETs to be destroyed is 3,422,983.56.
CET historical destruction data，Source: CoinEx; TokenInsight
4.2.2 Application scenarios
The current usage scenarios of CET are discounted platform transaction fees, VIP services, special activities rights and interests, CoinEx Chain internal circulation fuel, and use of external scenarios.
Deduction and discount of platform transaction fees
CoinEx platform users can use CET to deduct transaction fees when conducting transactions within the platform. At the same time, using CET to pay transaction fees can enjoy the exclusive preferential rates provided by the platform.
CET fee discount amount，Source：CoinEx; TokenInsight
Holding a certain number of CETs can make a user become a platform VIP user. Users can also use CET to purchase platform VIPs to obtain corresponding privileges such as discounted rates, accelerated withdrawals, and exclusive customers.
Special activity rights
CET holders can enjoy special rights and interests in platform marketing activities, such as participating in the airdrop of tokens on the platform or accelerating opportunities for high-quality projects.
CoinEx Chain built-in token
CET will serve as a native token of CoinEx Chain, circulate and serve as fuel in CoinEx Chain, and users can also use CET to invest or trade other digital assets. In addition, CET can also serve as transaction fees and function fees (issuing Token, creating new trading pairs, account activation), etc. in the platform, and users can also participate in the campaign of validators by staking CET tokens.
CET is currently used as a circulation token as well for CoinEx DEX to issue tokens, create orders, Bancor, address activation, set address aliases, and other application scenarios.
In general, the types of application scenarios of CET are not plenty enough. In order to better develop the internal ecosystem of the platform, it is necessary to design and develop more CET usage scenarios and incentive mechanisms to increase the retention rate of users while adding new users.
4.2.3 Token incentive
As the native token of the CoinEx public chain, CET will be used as a block incentive to increase community participation after the mainnet of the public chain launched. The 315 million CET held by the foundation in the total CET issuance will be used to incentivize initial verification nodes and Staking participants.
CET annual incentive information，Source：CoinEx; TokenInsight
5. Team & Partners
5.1 Core team membersAmong the core team members of CoinEx, the technical members account for a relatively large proportion. The technical team’s overall ability is good and the team members have different technical experience backgrounds including cryptography, underlying protocols, marketing, and operations. The team has rich blockchain industry experience, especially the chief developer, who has about 13 years of development industry experience.
5.2 Investment institutions and partnersCoinEx’s investment is led by Bitmain and its main partners include Matrixport, Bitcoin.com, CoinBull, Consensus Lab, BTC.com, BTC.top, Hoo Exchange, Wa Yi, ChainFor.com, etc.
Investment institutions and major partners have rich experience in the industry, which can promote the development of projects to a certain extent. However, the current industry involved by the partners is not wide enough, and it will have a limited role in promoting the future of CoinEx’s enriching business lines and increasing ecosystem functions.
6. Community AnalysisAccording to TokenInsight’s research of the CoinEx platform community, as of April 23, 2020, its official Twitter has 19,800 followers and 932 tweets; the official Telegram has 45 official groups, 3 in Chinese and English, and the other is Korean, Arabic, Vietnamese, Indian and other small language groups, with a total number of 56088 people; the current number of followers on Facebook accounts is 3,107. The overall community followers still have a lot of room for improvement, and community activeness needs to be improved.
Number of followers on the CoinEx social platform，Source:TokenInsight
At present, the project’s search popularity and official website visits are both top-notch, and monthly visits have slowly returned to their previous visit levels after experiencing a significant decline in December 2019.
CoinEx visit popularity，Source: TokenInsight, Similarweb, Google
At present, the visitors of the CoinEx website are distributed in multiple countries, and there are no visits concentration from a single country or region. Therefore, CoinEx’s comprehensive global influence is widely distributed and has a reasonable degree of internationalization.
CoinEx official website’s top 5 countries by number of visitors，Source: CoinEx, TokenInsight
Click here to register on CoinEx!
Hi everyone, it’s been a difficult few weeks for everyone around the world with a constant barrage of sobering news – from COVID-19 to super cyclonic storms to George Floyd. I hope this update offers some much needed respite. Here’s your week at Parachute + partners (1 May - 7 May'20):submitted by abhijoysarkar to ParachuteToken [link] [comments]
Congratulations to Foo for winning the inaugural Parachute Crypto League (which started last week). New leagues (including ones with $PAR prizes) were added this week. New Parachute league was added as well. How does it work? Click here to find out. Hope you got a chance to partake in the Tiproom giveaway event. Bose hosted a Football-themed trivia in TTR for some sweet $PAR rewards. Noice! Gamerboy’s random quiz for 1k $PAR per question got everyone scratching their heads. Unique and Victor’s trivias were pretty as well. Charlotte changed up the format of standard tiproom quizzes with a new one this week. Cap shared a sneak peek of what’s to come in the next few weeks. New $PAR use-case as well. Plus, latest digestives coming up. The 2FT ongoing theme continued with "videos featuring bands or artists whose name starts with the letters U, V, W, X or Y" this week. Check out all the cool music that got posted from Sebastian’s playlist. Epic gif Peace Love. Haha! Want to get some $PAR for staying in shape during the lockdown? Don’t forget to check out the TTR Pushups Contest. And if you were a fan of Jason’s Financial Fridays in 2gether, stay tuned for next week since it is coming back to Parachute. ParJar is currently at 32k+ users and 1.4M+ tips. Epic!
Jason shared a sneak peek into his computing setup. Pretty cool!
aXpire COO Matthew Markham wrote about the effect of legal billing software on law practice management. The monthly 200k $AXPR burn can be tracked here. 2gether CEO Ramon Ferraz routinely sends out emailers with project updates to all Founders (registered 2gether members). Click here to check out the latest. The crew also compiled a list of 7 books to read in order to learn about cryptocurrencies. Voyager introduced $XRP (Ripple), $EOS, $XLM (Stellar), $OMG (OmiseGO) and $ZRX (0x) to its Interest Program. Read more about it here. They celebrated it with a massive 5k $XRP giveaway along with an interest boost program. CEO Stephen Ehrlich sat down for an interview on Scott Melker’s (The Wolf of All Streets) podcast this week. Stephen was also interviewed by Jason Hartman (host of Creating Wealth Show). Switch released the first set of a 10 part series blog posts this week chronicling the story of the project starting with the beginning, move from Ethershift to Switch, launch of SwitchDex and the various Switch tokens. More to come next week. Fantom submitted a proposal to the MakerDAO community for adding $FTM as a collateral for $DAI. The latest technical update was published as well. The update covers news such as Fantom’s consensus protocol now being compatible to Application BlockChain Interface (ABCI). ABCI allows blockchain "transactions to be processed in any programming language". Saweet! Read more about ABCI compatibility here. The first Uptrennd Halvening ($1UP gets doubly difficult to earn) is expected to happen around the time of bitcoin halvening. Altcoin Buzz talked about it in their latest video. Huge congratulations on crossing 100k members! Uptrennd also announced a Citizenship program aimed at improving the overall quality of posts and comments by offering more giving power to higher ranked members. Jeff also sat down for interviews with Scott Cunningham for BeInCrypto and with Cash Alternative TV this week.
Amazing achievement, Uptrennd!
Following the launch of Pangaea Phase 3 last week, Harmony started an incentivised testnet staking program this week for delegators in partnership with Binance. The April #pow thread (i.e. project updates from April) can be found here. It was also summarised into an article. If you missed last week’s AMA, you can catch up from the transcript. Pangaea Phase 3 testing now has 1k+ validators and delegators. Noice! Part 2 from last week’s smart contract webinar was released. Harmony's Edgar Aroutiounian gave a presentation at Ready Layer One's online conference on BLS Aggregate Signatures. The project joined Indian state Telangana’s Blockchain District Accelerator program T-Block Accelerator as an official platform partner. Cointelegraph covered this news as well. The team also shared the latest updates through a community hangout. IntelliShare founder Raymond Xiong will appear for an AMA with CoinKeeper next week. Elections for the 6th Autonomous Committee started this week. GET Protocol shared their thoughts on how to reopen Dutch museums safely. COTI’s April rewards were distributed. Crypto analysis collective Trade Dog’s in-dept project review was released. Congratulations on getting the highest rating. If you have missed the events of April, the latest newsletter’s got your back. DoYourTip announced a partnership with InFocus Games to have their mascot Tipply as a playable character in the Pathfinders game in the form of an ERC1155 asset. The demo is live already. Have fun gaming! A DYT trading league on Crypto Leagues was started as well.
Harmony’s Pangaea P3 testing turned out to be a success with high participation throughout
Read all about Opacity’s April updates here. District0x’s latest weekly update report can be read here. The latest Hydro blogpost cleared some FAQs about prepaid cards. Community requests for the latest Sentivate update was closed this week. The update includes browser upgrade, devMode toggles etc. The code commits can be tracked on GitHub. Check out how stream and play works here. If you are worried about censorship resistance of the Universal Web, have a read of this tweet thread. Plus, a $BTC giveaway contest was launched by the crew as well. Chief Engagement Officer at OST, Simona Pop, spoke at the first ever Ethereal Virtual Summit this week in addition to speaking at Ready Layer One’s community event (as mentioned in the last update). The SelfKey team explored if there was a causal relationship between developer activity and market cap of a project. The data breach compilation article was updated. The crew will be hosting an AMA next week. The progress report for April was published. Now that Constellation’s Hypergraph Mainnet is live, read all about the current status and what next here. The team sat down for an AMA with KuCoin. The community-built balance-checker lets you look at mainnet wallet balances. The Yazom Mobile app got approved by Google Play. You can register for early access on the website. Blockchain Radio was integrated with CyberFM this week. This means all 17 featured shows and 23 radio hosts of Blockchain Radio will now be available on the CyberFM app.
And with that, we close for another week in the Parachuteverse. See you again with another update. Ciao.
Binance Chain, the blockchain network Binance DEX is based on, has been custom-built for decentralized exchanges with one-second block times and a large transactional capacity. Binance to Block Trading for US Customers Ahead of Plans for Regulated Exchange. By William M. Peaster June 14, 2019. Share on Facebook Share on Twitter Pinterest LinkedIn Tumblr Email. Share. Share on Facebook Share on Twitter Pinterest Email. Watch out, Coinbase: Binance is moving into your home turf. Adept at regulatory arbitrage among many things, cryptocurrency exchange giant Binance has ... Binance released a testnet for Binance DEX, a decentralized order-matching engine powered by Binance Chain technology. Buy Crypto. Markets. Trade . Derivatives. Finance. English/USD. Binance Blog. News and updates from the world’s leading cryptocurrency exchange. Blog > Binance Launches DEX Testnet for the New Era of Peer-to-Peer Cryptocurrency Trading. Feb 23. 2020. Binance Launches DEX ... Binance has finally launched its decentralized cryptocurrency exchange (DEX) powered by its own blockchain – but it's only available on a testnet for now. Binance startet mit der Binance DEX eine eigene Blockchain, die “Binance Chain”. Jede Sekunde wird ein Block zu dieser Blockchain hinzugefügt. Möglich wird dieser Vorgang dadurch, dass es zunächst nur sehr wenige Nodes mit sehr starken Computern geben wird. Binance Smart Chain testnet relies on a system of 41 validators with Proof of Staked Authority (PoSA) consensus that can support short block time and lower fees. Validator nodes take turns to produce blocks. Every validator will take turns to produce the blocks in the same probability (if they stick to 100% liveness). The reward for validators is the fees collected from transactions in each ... Binance chain testnet is expected to have a hardfork upgrade at block height 24,020,000. The fork is scheduled around 7:00am UTC on the 26th June 2019. The mainnet will also undergo an upgrade a few weeks from now as officially announced by the management. Block Explorer URL: https://testnet.bscscan.com We’re going to use the testnet in this tutorial , but you will likely want to use the mainnet. We recommend adding both if you intend to use MetaMask to transfer BNB or Binance Smart Chain tokens. CEO Changpeng ‘CZ’ Zhao said in December that the Binance DEX testnet would go online in the coming months. In an ask-me-anything session last week, he set a provisional launch date for February 21st – this Thursday. Similar to the conventional platform, they are traded against a small number of quoted digital assets. This includes Bitcoin (BTC), Ether (ETH) and the USD-pegged ... Binance has been working on its own blockchain, Binance Chain or Binance DEX, for a while now, and it is less than 24 hours away from launching the testnet. New Binance DEX Testnet Launches in Less Than 24 Hours: Here’s What Users Need to Know
[index]          
🔐 Ledger Nano X 🔐 New Ledger Nano X !!! Pre-Order Here: https://www.ledgerwallet.com/r/6057 The CryptoDad shows you how to test out the new Binace DEX Testne... Binance is going to disable all services to all US users starting in September to comply with regulations. They will open up a US division soon. ----- Get Brave ad-free browser: https://brave.com ... The largest global cryptocurrency exchange by trading volume, released a testnet for Binance DEX, a decentralized order-matching engine powered by Binance Chain technology. Traders can now create ... - show you an Ethereum testnet block explorer - what a Bitcoin testnet address looks like - what a faucet is In this video series different topics will be explained which will help you to ... Binance Suing The Block; Cardano Creator $100K Bitcoin Prediction; Ripple Blockchain Association The Cryptoviser. Loading... Unsubscribe from The Cryptoviser? Cancel Unsubscribe. Working ... In this demo, I go through the Binance DEX on test net as they have recently launched and explain each of the options for people that are interested in testi... Bitcoin Halving arrives. Shelley Haskell Testnet Launches. Binance.us launches OTC desk ----- Twitter -- https://twitter.com/goodfreephotos Patreon -... Binance is blocking US residence soon. Are you wondering which alternative Bitcoin and Crypto exchanges to use? If so tune in! Become a CryptosRus INSIDER to gain exclusive insight on the market ... This video is unavailable. Watch Queue Queue 🔴 New LIVE Roger Ver discussion about Bitcoin Cash BCH, Bitcoin.com and Litecoin LTC BCH Bitcoin Cash 3,876 watching Live now